Figure 1-23 Tightening The Xio Tri-Module Screws - Silicon Graphics Octane2 Manual

007-4209-003
6. Tighten the captive screws in the sliding handles, as shown in Figure 1-23.
Tightening the XIO Tri-Module Screws
Figure 1-23
7. Remove the wrist strap.
8. Reconnect all cables to the XIO Tri-Module, except for the monitor cable.
You are finished installing your DCD.
Now go to Chapter 2 for instructions on connecting two monitors to the DCD.
Reinstalling the XIO Tri-Module
27