Figure 1-7 Removing The Xio Tri-Module - Silicon Graphics Octane2 Manual

1: Installing the DCD in a Single Head Octane2
!
10
3. Grasp the XIO Tri-Module by the immovable handle, and support the base of the
module as you remove it from the chassis, as shown in Figure 1-7.
Caution: Do not push on the sliding handles after you remove the XIO Tri-Module.
Later when you reinsert the Tri-Module, the sliding handles must protrude.
Removing the XIO Tri-Module
Figure 1-7
007-4209-003