Removing The Display Option Card; Figure 5-7 Installing The Display Option Card Screws - Silicon Graphics 320 Owner's Manual

Visual workstation
Hide thumbs Also See for 320:
Table of Contents

Advertisement

62 Chapter 5
6.
Replace the two screws, as shown in Figure 5-7.
Figure 5-7
Installing the Display Option Card Screws
7.
Replace the side cover. For detailed instructions, see "Replacing
the Side Cover" on page 21.

Removing the Display Option Card

1.
Shut down the system and turn off the power. For detailed
instructions, see "Shutting Down the System" on page 12.
2.
Unplug the power cord and flat panel display cable from the
back of the system.
3.
Remove the side cover. For detailed instructions, see "Removing
the Side Cover" on page 16.

Advertisement

Table of Contents
loading

Table of Contents