Installing The Dcd In A Single Head Octane2 - Silicon Graphics Octane2 Manual

1.
007-4209-003
Chapter 1

Installing the DCD in a Single Head Octane2

This chapter shows you how to install the DCD in your Octane or Octane2 workstation
with Single Head VPro graphics. The following topics are covered:
• "Checking Your Shipment" on page 2
• "Checking Your Graphics Board" on page 3
• "Determining Your IRIX Version" on page 4
• "Preparing Your Workstation" on page 5
• "Connecting the DCD" on page 12
• "Reinstalling the XIO Tri-Module" on page 25
• "Removing the DCD" on page 28
1