Powering Off Your Workstation; Figure 2-2 Powering Off Your Workstation - Silicon Graphics Octane2 Manual

Powering Off Your Workstation

007-4209-003
To power off your workstation, follow these steps:
1. Open the cover and press the power button to power off your workstation (see A in
Figure 2-2).
2. Unplug the power cable (B).
3. Press the monitor power switch to power off your monitor (C).
4. Wait 5 minutes before removing the Dual Head XIO Module.
B
Power cable
Figure 2-2 Powering Off Your Workstation
Warning:
The heat sinks on the XIO boards get very hot. Wait 5 minutes after
powering off your workstation before you remove the Dual Head XIO Module. Test
the temperature of the heatsinks before handling any of the XIO boards.
Preparing Your Workstation
A
Power button
C
Power switch
37