Connecting The Dcd; Figure 2-9 Placing The Dual Head Xio Module On Its Side - Silicon Graphics Octane2 Manual

2: Installing the DCD in a Dual Head Octane2

Connecting the DCD

44
The DCD connects to the daughterboard slot on one of the Dual Head XIO Module VPro
graphics boards.
1. Place the Dual Head XIO Module on a flat, antistatic surface, as shown in
Figure 2-9. An empty antistatic bag on your desk works well.
When the Dual Head XIO Module is out of the chassis, the center plastic knob must
protrude.
Figure 2-9 Placing the Dual Head XIO Module on Its Side
Place caps on
compression connectors
007-4209-003