Measure:f2Rphase - Rigol DS4000E Series Programming Manual

RIGOL

:MEASure:F2RPhase

Syntax 1
:MEASure:F2RPhase [<chanA>,<chanB>]
Description 1
Measures the phase deviation (falling edge-rising edge) between the two specified source channels.
Syntax 2
:MEASure:F2RPhase? [<chanA>,<chanB>]
Description 2
Measures the phase deviation (falling edge-rising edge) between the two specified source channels. The
default unit is °.
Parameter
Name Type
<chanA> Discrete
<chanB> Discrete
Remarks
Before making measurements, turn on the channels to be measured.

When [<chanA>,<chanB>] is omitted, this command will be applied to Source A (refer to

the :MEASure:SETup:PSA command) and Source B (refer to the :MEASure:SETup:PSB command) of
phase measurement currently set by default.
Return Format
The query returns the measurement results in scientific notation. When the measurement results are invalid,
the query returns 9.9e37.
:MEASure:F2RPhase:SAVerage
:MEASure:F2RPhase:SCURrent
:MEASure:F2RPhase:SDEViation
:MEASure:F2RPhase:SMAXimum
:MEASure:F2RPhase:SMINimum
Syntax 1
:MEASure:F2RPhase:SAVerage [<chanA>,<chanB>]
:MEASure:F2RPhase:SCURrent [<chanA>,<chanB>]
:MEASure:F2RPhase:SDEViation [<chanA>,<chanB>]
:MEASure:F2RPhase:SMAXimum [<chanA>,<chanB>]
:MEASure:F2RPhase:SMINimum [<chanA>,<chanB>]
Description 1
Measures the phase deviation (falling edge-rising edge) between the two specified source channels, and
enables the statistic function of the measurement results.
Syntax 2
:MEASure:F2RPhase:SAVerage? [<chanA>,<chanB>]
:MEASure:F2RPhase:SCURrent? [<chanA>,<chanB>]
:MEASure:F2RPhase:SDEViation? [<chanA>,<chanB>]
:MEASure:F2RPhase:SMAXimum? [<chanA>,<chanB>]
:MEASure:F2RPhase:SMINimum? [<chanA>,<chanB>]
2-124
Range
{CHANnel1|CHANnel2|CHANnel3|CHANnel4}
{CHANnel1|CHANnel2|CHANnel3|CHANnel4}
Chapter 2 Command System
Default
--
--
DS4000E Programming Guide