Calculate:add - Rigol DS4000E Series Programming Manual

Chapter 2 Command System

:CALCulate:ADD

Command List:
:CALCulate:ADD:INVert

:CALCulate:ADD:SA

:CALCulate:ADD:SB

:CALCulate:ADD:VOFFset

:CALCulate:ADD:VSCale

:CALCulate:ADD:INVert
Syntax
:CALCulate:ADD:INVert <bool>
:CALCulate:ADD:INVert?
Description
Enables or disables the invert display of the waveform of addition operation; or queries the on/off status of
the invert display of the waveform of addition operation.
Parameter
Name Type
<bool> Bool
Remarks
1|ON: turns the waveform invert on. The waveform voltage values are inverted and then displayed.

0|OFF: turns the waveform invert off. The waveform is displayed normally.

Return Format
The query returns 1 or 0.
:CALCulate:ADD:SA
:CALCulate:ADD:SB
Syntax
:CALCulate:ADD:SA <source>
:CALCulate:ADD:SA?
:CALCulate:ADD:SB <source>
:CALCulate:ADD:SB?
Description
Sets or queries the channel source of Source A or Source B in "add" operation.
Parameter
Name Type
<source> Discrete
Return Format
The query returns CHAN1, CHAN2, CHAN3, or CHAN4.
DS4000E Programming Guide
Range
{{1|ON}|{0|OFF}}
Range
{CHANnel1|CHANnel2|CHANnel3|CHANnel4}
RIGOL
Default
0|OFF
Default
CHANnel1
2-39