Document Overview - Rigol DS4000E Series Programming Manual

RIGOL

Document Overview

This manual is your guide to programming RIGOL DS4000E series digital oscilloscope.
Tip
For the newest version of this manual, please download it from RIGOL official website (www.rigol.com).
Main Topics in this Manual:
Chapter 1 SCPI Command Overview
This chapter introduces the syntax, symbols, parameters, and abbreviation rules of the SCPI commands.
Chapter 2 Command System
This chapter introduces the syntax, function, parameters, and usage of each command.
Chapter 3 Programming Examples
This chapter illustrates how to control the DS4000E series digital oscilloscope by programming in Excel,
LabVIEW, MATLAB, Visual Basic 6.0, and Visual C++ 6.0.
Format Conventions in this Manual:
1. Function Key
The key on the front panel is denoted by the format of "Key Name (Bold) + Text Box" in the manual.
For example, Utility denotes the "Utility" key.
2. Menu Softkey
The menu softkey is denoted by the format of "Menu Name (Bold) + Character Shading" in the manual.
For example, System denotes the "System" softkey under Utility.
3. Operation Procedures
The next step is denoted by the arrow key (""). For example, Utility  System denotes that first
press Utility, and then press the System softkey.
Content Conventions in this Manual:
DS4000E series includes the following models. Unless otherwise specified, this manual takes DS4024E as
an example to make a detailed introduction about the commands of DS4000E series.
Model
DS4024E
DS4014E
II
Bandwidth
200 MHz
100 MHz
No. of Channels
4
4
DS4000E Programming Guide