Measure:f2Rdelay - Rigol DS4000E Series Programming Manual

Chapter 2 Command System

:MEASure:F2RDelay

Syntax 1
:MEASure:F2RDelay [<chanA>,<chanB>]
Description 1
Measures the delay (falling edge-rising edge) between the two specified source channels.
Syntax 2
:MEASure:F2RDelay? [<chanA>,<chanB>]
Description 2
Measures the delay (falling edge-rising edge) between the two specified source channels. The default unit
is s.
Parameter
Name Type
<chanA> Discrete
<chanB> Discrete
Remarks
Before making measurements, turn on the channels to be measured.

When [<chanA>,<chanB>] is omitted, this command will be applied to Source A (refer to

the :MEASure:SETup:DSA command) and Source B (refer to the :MEASure:SETup:DSB command) of
delay measurement currently set by default.
Return Format
The query returns the measurement results in scientific notation. When the measurement results are invalid,
the query returns 9.9e37.
:MEASure:F2RDelay:SAVerage
:MEASure:F2RDelay:SCURrent
:MEASure:F2RDelay:SDEViation
:MEASure:F2RDelay:SMAXimum
:MEASure:F2RDelay:SMINimum
Syntax 1
:MEASure:F2RDelay:SAVerage [<chanA>,<chanB>]
:MEASure:F2RDelay:SCURrent [<chanA>,<chanB>]
:MEASure:F2RDelay:SDEViation [<chanA>,<chanB>]
:MEASure:F2RDelay:SMAXimum [<chanA>,<chanB>]
:MEASure:F2RDelay:SMINimum [<chanA>,<chanB>]
Description 1
Measures the delay (falling edge-rising edge) between the two specified source channels, and enables the
statistic function of the measurement results.
Syntax 2
:MEASure:F2RDelay:SAVerage? [<chanA>,<chanB>]
:MEASure:F2RDelay:SCURrent? [<chanA>,<chanB>]
:MEASure:F2RDelay:SDEViation? [<chanA>,<chanB>]
:MEASure:F2RDelay:SMAXimum? [<chanA>,<chanB>]
:MEASure:F2RDelay:SMINimum? [<chanA>,<chanB>]
Description 2
DS4000E Programming Guide
Range
{CHANnel1|CHANnel2|CHANnel3|CHANnel4}
{CHANnel1|CHANnel2|CHANnel3|CHANnel4}
RIGOL
Default
--
--
2-121