Function:wreplay - Rigol DS4000E Series Programming Manual

Chapter 2 Command System

:FUNCtion:WREPlay

Command List:
:FUNCtion:WREPlay:FCURrent

:FUNCtion:WREPlay:FEND

:FUNCtion:WREPlay:FMAX?

:FUNCtion:WREPlay:FSTart

:FUNCtion:WREPlay:INTerval

:FUNCtion:WREPlay:MODE

:FUNCtion:WREPlay:OPERate

:FUNCtion:WREPlay:TTAG

:FUNCtion:WREPlay:CTAG?

:FUNCtion:WREPlay:FCURrent
Syntax
:FUNCtion:WREPlay:FCURrent <frame>
:FUNCtion:WREPlay:FCURrent?
Description
Sets or queries the current frame in waveform playback.
Parameter
Name Type Range
1 to the number of frames that have been
<frame> Integer
recorded
Remarks
The actual range of the current frame is from the currently set start frame to the end frame of the waveform
playback (refer to :FUNCtion:WREPlay:FSTart and :FUNCtion:WREPlay:FEND commands).
Return Format
The query returns an integer.
:FUNCtion:WREPlay:FEND
Syntax
:FUNCtion:WREPlay:FEND <frame>
:FUNCtion:WREPlay:FEND?
Description
Sets or queries the end frame in waveform playback.
Parameter
Name Type Range
1 to the number of frames that have been
<frame> Integer
recorded
Remarks
The actual range of the end frame is from the currently set start frame of waveform playback (refer to
the :FUNCtion:WREPlay:FSTart command) to the number of frames that have been recorded.
Return Format
The query returns an integer.
DS4000E Programming Guide
Default
Number of frames that have
been recorded
Default
Number of frames that have
been recorded
RIGOL
2-89