Rigol DS1000E Series User Manual
  1. Manuals
  2. Brands
  3. Rigol Manuals
  4. Test Equipment
  5. DS1000E series
  6. User manual

Rigol DS1000E Series User Manual

Digital oscilloscopes
Hide thumbs Also See for DS1000E Series:
Table of Contents

Advertisement

Quick Links

User's Guide
RIGOL
Publication number UGA07118-1110
Dec. 2015
DS1000E, DS1000D Series
Digital Oscilloscopes
DS1102E, DS1052E, DS1102D, DS1052D
© 2008 RIGOL Technologies, Inc. All Rights Reserved
Arrow.com.
Downloaded from

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS1000E Series and is the answer not in the manual?

Questions and answers

Related Manuals for Rigol DS1000E Series

Summary of Contents for Rigol DS1000E Series

  • Page 1 User’s Guide RIGOL Publication number UGA07118-1110 Dec. 2015 DS1000E, DS1000D Series Digital Oscilloscopes DS1102E, DS1052E, DS1102D, DS1052D © 2008 RIGOL Technologies, Inc. All Rights Reserved Arrow.com. Downloaded from...
  • Page 2 Arrow.com. Arrow.com. Downloaded from Downloaded from...
  • Page 3 2. RIGOL products are protected by patent law in and outside of P.R. China. 3. Information in this publication replaces all previously corresponding material. 4. RIGOL Technologies, Inc. reserves the right to modify or change part of or all the specifications and pricing policies at company’s sole decision.
  • Page 4 Do Not Operate With Suspected Failures. If suspected damage occurs with the instrument, have it inspected by qualified service personnel before further operations. Provide Proper Ventilation. Refer to the installation instructions for proper ventilation of the instrument. © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 5 The DS1000E, DS1000D series Digital Oscilloscopes is designed to safely withstand occasional transient overvoltage up to 1000Vpk. Do not use this equipment to measure circuits where transient overvoltage could exceed this level. © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 6 Hazardous Safety Protective Grounding Test Voltage Warning Earth Terminal Terminal Grounding of Chassis Terminal © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from...

  • Page 7: General-Purpose Oscilloscopes

    DS1102D, DS1052D (With Logic Analyzer) DS1000E, DS1000D series are kinds of economical digital oscilloscope with high-performance. DS1000E series are designed with dual channels and 1 external trigger channel. DS1000D series are designed with dual channels and 1 external trigger channel as well as 16 channels logic analyzer.
  • Page 8 Waveform intensity can be adjusted  To display a signal automatically by AUTO  Pop-up menu makes it easy to read and use  © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.

  • Page 9: Table Of Contents

    Example 5: Making Cursor Measurements ..........3-6 Example 6: The application of the X-Y operation ........3-8 Example 7: Triggering on a Video Signal ..........3-10 Example 8: FFT Cursor measurement ............ 3-12 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 10 Appendix A: Accessories ................ 6-1 Appendix B: Warranty ................6-2 Appendix C: Care and Cleaning .............. 6-3 Appendix D: Contact Us ................. 6-4 Index ...................... 1 © 2008 RIGOL Technologies, Inc. VIII User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.

  • Page 11: Chapter 1 Quick Start

    To Display a Signal Automatically  To Understand the Vertical System  To Understand the Horizontal System  To Understand the Trigger System  © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.

  • Page 12: To Inspect The Instrument

    Representative. If the shipping container is damaged, or the cushioning materials show signs of stress, please notify the carrier as well as the RIGOL sales office. Keep the shipping materials for the carrier’s inspection. RIGOL offices will arrange for repair or replacement at RIGOL’s option without waiting for claim settlement.

  • Page 13: The Panels And User Interface

     The front panel of DS1000E:  The front panel of DS1000D: Figure 1- 1 Front Panel Figure of DS1000E, DS1000D Series Oscilloscope © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 14 Channel Input Compensation Figure 1- 2 Front Panel Instruction 2. Rear Panel Figure 1- 3 Rear Panel Figure of DS1000E, DS1000D Series Oscilloscope © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 15 LEVEL knob.  The name with a drop shadow denotes the menu operating button, such as  Storage denoting the "Storage" menu item under Measure. © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 16 Horizontal Channel coupling Trigger time base div and vertical div offset Figure 1- 6 User Interface (Analog and Digital channels) © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.

  • Page 17: Appearance And Dimensions

    RIGOL Appearance and Dimensions Figure 1- 7 Front View Figure 1- 8 Side View © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.

  • Page 18: To Perform A Functional Check

    To avoid electric shock, be sure the oscilloscope is properly grounded. 2. Input a signal to a channel of the oscilloscope DS1000E series: 2 channels input + 1 external trigger channel input DS1000D series: 2 channels input + 1 external trigger channel input +16 channels...
  • Page 19 Push the CH2 button to turn on channel2, repeat steps 2 and 3. NOTE: The signal output from Probe compensator should only be used for probe compensation, not for calibration. © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com.

  • Page 20: To Compensate Probes

    WARNING: To avoid electric shock while using the probe, be sure the perfection of the insulated cable, and do not touch the metallic portions of the probe head while it is connected with a voltage source. © 2008 RIGOL Technologies, Inc. 1-10 User’s Guide for DS1000E, DS1000D Series Arrow.com.

  • Page 21: Digital Leads (Only For Ds1000D Series)

    Figure 1- 14 Connect the digital leads CAUTION: Use only FC1868, LH1116, TC1100 and LC1150 made by RIGOL for specified DS1000D series. 3. Connect a test clip to one lead wire; make sure it’s connection good. Test clip Figure 1- 15 Input Interface of Digital Channel ©...
  • Page 22 4. Test your device with the clip. Figure 1- 16 Digital Channel Measurement 5. Remember to connect Ground Channel to the DUT’s ground terminal. Figure 1- 17 Connecting to the Ground © 2008 RIGOL Technologies, Inc. 1-12 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.

  • Page 23: To Display A Signal Automatically

    The oscilloscope will automatically set up VERTICAL, HORIZONTAL and TRIGGER controls to display the input signal. Adjust the controls manually to get the best results if necessary. © 2008 RIGOL Technologies, Inc. 1-13 User’s Guide for DS1000E, DS1000D Series Arrow.com.

  • Page 24: To Understand The Vertical System

    If the channel is AC coupled, the DC component of the signal is blocked, allow you to use greater sensitivity to display the AC component of the signal. © 2008 RIGOL Technologies, Inc. 1-14 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 25 Press OFF button to turn off the channel. Coarse/Fine Shortcut key The Coarse/Fine vertical control can be set by simply pressing the vertical knob. © 2008 RIGOL Technologies, Inc. 1-15 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.

  • Page 26: To Understand The Horizontal System

    Delayed Scan mode and it is equal to the following menu operations, MENU→Delayed→ON. * NOTE: The speed of horizontal scan varies by different models. © 2008 RIGOL Technologies, Inc. 1-16 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 27 Horizontal position control Trig-Offset: The position of the practical trigger point relative to center of the memory. Adjust the horizontal knob to move the trigger point horizontally. © 2008 RIGOL Technologies, Inc. 1-17 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.

  • Page 28: To Understand The Trigger System

    Trigger Level to 0 Shortcut key Turn the knob to change trigger level value and press the knob to set trigger level back to 0 as a shortcut key. © 2008 RIGOL Technologies, Inc. 1-18 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 29 This function helps to view complex signals such as an AM waveform. Press Holdoff button to activate ( ) knob, then turn it to adjust Holdoff time. © 2008 RIGOL Technologies, Inc. 1-19 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 30 Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from...

  • Page 31: Chapter 2 Operating Your Oscilloscope

    To Use Run Control Buttons ( AUTO, RUN/STOP)  Please refer to this chapter more carefully to get more information of the measurement and operation methods of DS1000E and DS1000D. © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.

  • Page 32: To Set Up The Vertical System

    500X 1000X Setup digital filter (See table 2-4) Digital filter Go to the next menu page (The followings are the same, no more explanation) © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 33 DC component of the input signal. The waveform is displayed as Figure 2- AC coupling setup AC coupling status symbol Figure 2- 3 AC coupling setting © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 34 Press CH1→Coupling→GND, to set “GND” coupling, it blocks the input signal. The screen displays as Figure 2-5: GND coupling setup GND coupling status symbol Figure 2- 5 GND coupling setting © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 35 Press CH1→BW Limit→ON, to set up bandwidth limit to “ON” status. It will reject the frequency component higher than 20MHz. 20M BW limit Mark of BW limit Figure 2- 7 Turn on the BW limit © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 36 Use the 1000:1 attenuation Table 2- 3 Probe setting Probe attenuation factors Corresponding settings 10:1 50:1 100:1 100X 500:1 500X 1000:1 1000X © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 37 The waveform when turning off digital filter Turn on digital filter Mark of digital filter Figure 2- 10 The waveform when turning on digital filter © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 38 It will be helpful to adjust the waveform in smooth steps. Fine adjustment Fine adjustment data Figure 2- 12 Fine configurations © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 39 Figure 2- 13 and Figure 2- 14 show the changes after inversion. Invert OFF Figure 2- 13 The waveform before inversion Invert ON Figure 2- 14 The waveform after inversion © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 40 Define CH1 or CH2 as source A Source B Define CH1 or CH2 as source B Invert the MATH waveform. Invert Restore to original waveform display. © 2008 RIGOL Technologies, Inc. 2-10 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 41 Full screen Display FFT waveform on full screen Vrms Set “Vrms ” as vertical unit Scale dBVrms Set “dBVrms ” as vertical unit 2-11 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 42 Hanning. Blackman Best magnitude, worst Single frequency waveforms, to frequency resolution. Find higher order harmonics. © 2008 RIGOL Technologies, Inc. 2-12 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 43 It’s normally half of the sample rate. This frequency is called the Nyquist frequency. Frequency above the Nyquist frequency will be under sampled, causing a situation known as aliasing. 2-13 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 44 Select external memory location Save REF waveform to outer memory Save location Import Go to import menu(see table 2-14) Reset Reset REF waveform © 2008 RIGOL Technologies, Inc. 2-14 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 45 2-11) Import the REF file to internal Import memory Delete Delete file File Figure 2- 21 Import /export interface 2-15 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 46 Comments Move the cursor up Move the cursor down To delete chosen letter Save Execute the operation Figure 2- 23 Export interface © 2008 RIGOL Technologies, Inc. 2-16 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 47 Set up new file in Path and File. (Folder) Set up new folder in directory. Delete Delete file(Folder) File(Folder) Figure 2- 25 Save interface 2-17 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 48 To delete chosen letter Save Execute the operation File name input box Upper/Lower Case Switch Switch Chinese/English Figure 2- 27 Chinese Input interface © 2008 RIGOL Technologies, Inc. 2-18 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 49 Switch among Path, Directory and Explorer Directory File File Import the REF file into internal Import memory Figure 2- 29 Import interface 2-19 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 50 4. Press soft button No.2 to select the save location of REF waveform. 5. Press soft button No.3 to save the waveform as REF. NOTE: The reference function is not available in X-Y mode. © 2008 RIGOL Technologies, Inc. 2-20 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 51 ) knob. The chosen channel will display in red color. (3) Turn vertical knob to re-position the channel in screen. The figure of menu shows as follow. 2-21 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 52 Figure 2- 33 Set the threshold Threshold explanation LOGIC STANDARD CMOS USER THRESHOULD VLOTAGE 1.4V 2.5V -1.3V -8V to 8V © 2008 RIGOL Technologies, Inc. 2-22 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 53 Turn off Display 8 channels in a single screen Size Display 16 channels in a single screen Reset Reset waveform of channel D15-D8 2-23 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 54 16 channels on the screen. 4. Reset the digital channels display Press LA→D7-D0→Reset, or D15-D8→Reset to reset the display of digital channels. © 2008 RIGOL Technologies, Inc. 2-24 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 55 Math (purple letter) MATH Selected Math (black letter) No indicator NOTE Pressing LA will turn all the digital channels on/off. 2-25 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 56 4. During the vertical position, a position message is displayed on the left bottom of the screen, in the same color as the corresponding channel. The unit is V (Volts). © 2008 RIGOL Technologies, Inc. 2-26 User’s Guide for DS1000E, DS1000D Series Arrow.com.

  • Page 57: To Set Up The Horizontal System

    Reset The parameter status symbol will be displayed on the screen during horizontal system settings, which can help users to judge the channel status quickly. 2-27 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 58 ③ The trigger position in the current waveform windows. ④ The horizontal time base (main time base). ⑤ The trigger’s horizontal offset according to the center of the window. © 2008 RIGOL Technologies, Inc. 2-28 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 59 When choosing this mode to view low frequency signals, it is recommended that the channel coupling be set as DC. Time/Div: Horizontal scale. The Time/Div control expands or compresses the waveform. 2-29 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 60 Delayed Scan. The value at bottom of the screen is the main time base and the value on the center bottom means the Delayed Scan time. © 2008 RIGOL Technologies, Inc. 2-30 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 61 Notice the changes in the status bar. Delayed Scan Shortcut Key: Delayed Scan function can be activated not only by menu but also by pressing horizontal knob. 2-31 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 62 REF and MATH Operations  Delayed Scan Mode  Vector Display Mode  Horizontal knob  Trigger Controls  © 2008 RIGOL Technologies, Inc. 2-32 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 63 (scale factor) for the main or the time base of Delayed Scan. When Delayed Scan is enabled, it changes the width of the window zone by changing the Delayed Scan time base. 2-33 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.

  • Page 64: To Set Up The Trigger System

    The button that activates the trigger controls menu. Press the Trigger MENU key to enter the trigger system setting interface. Figure 2- 41 Trigger controls interface © 2008 RIGOL Technologies, Inc. 2-34 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 65 Alternate: Trigger on non-synchronized signals of the dual channels. Pattern: To Trigger through detecting a specified code. Duration: To trigger within a specified time on the conditions of a specified code. 2-35 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 66 Acquire waveform when trigger occurred. Single When trigger occurs, acquire waveform then stop Set up To go to Set Up menu, see table 2-38 © 2008 RIGOL Technologies, Inc. 2-36 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 67 To select pulse condition (-Pulse width less than) (-Pulse width more than) (-Pulse width equal to) Settings Set required pulse width <Width> 2-37 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 68 To go to Set Up menu, see table 2-38 NOTE: The Pulse width adjust range is 20ns ~ 10s. When the condition is met, it will trigger and acquire the waveform. © 2008 RIGOL Technologies, Inc. 2-38 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 69 To go to set up menu. See table 2-38 NOTE You can adjust LEVEL A/ LEVEL B or both simultaneous by turning the knob. 2-39 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 70 Normal occurred. Single When trigger occurs, acquire one waveform and then stop To go to set up menu, see table Set Up 2-39 © 2008 RIGOL Technologies, Inc. 2-40 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 71 If the video signal has positive-going sync pulses, use the negative polarity selection. Figure 2- 50 Figure 2- 51 Video Trigger: Line Synchronization Video Trigger: Field Synchronization 2-41 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 72 (+Pulse width more than) (+Pulse width equal to) When To select pulse condition (-Pulse width less than) (-Pulse width more than) (-Pulse width equal to) © 2008 RIGOL Technologies, Inc. 2-42 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 73 > Time Set Select the level to be adjusted by Vertical To go to set up menu. See table Set Up 2-38 2-43 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 74 < > Lines Set PAL/SECM Standard Select Video standard NTSC Set Up To go to set up menu, see table 2-39 © 2008 RIGOL Technologies, Inc. 2-44 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 75 Even field field PAL/SECM Standard Select Video standard NTSC Set Up To go to set up menu, see table 2-39 2-45 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 76 You can only appoint one code as edge. If you have appointed an edge, then appointed another edge in a different channel, and the first appointed edge will be set to X (Ignore). © 2008 RIGOL Technologies, Inc. 2-46 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 77 3. X (Ignore): Don’t care. If all the channels are ignored, the oscilloscope won’t be triggered. 4. Qualifier: A timer begins when code terms are satisfied. Duration trigger occurred in the time set by the qualifier. 2-47 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 78 <Sensitivity Setting> time slot before Holdoff <Holdoff Setting> another trigger event Holdoff Reset Reset Holdoff time 500ns © 2008 RIGOL Technologies, Inc. 2-48 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 79 Settings Comments Set time slot before another Holdoff <Holdoff Setting> trigger event Holdoff Reset Reset Holdoff time to 500ns 2-49 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 80 Press Set Up key to display trigger set up menu. Turn the multi function knob ( ) to change Holdoff time until waveform is stable. Press Reset can reset the Holdoff time to its default value. © 2008 RIGOL Technologies, Inc. 2-50 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 81 Normal: The Normal mode allows the oscilloscope to acquire a waveform only  when it is triggered. If no trigger occurs, the oscilloscope keeps waiting, and the 2-51 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 82 0.1div-1.0div, which means when it sets to 1.0div, the trigger circuit will not affect any signal with peak-peak amplitude less than 1.0div, so as to avoid the influence of the noise. © 2008 RIGOL Technologies, Inc. 2-52 User’s Guide for DS1000E, DS1000D Series Arrow.com.

  • Page 83: To Set Up The Sampling System

    : This function is used in “Average Acquisition”; NOTE : This function is used in “Real Time” sampling. The waveform display will be different when selecting different acquisition and sampling: 2-53 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 84 The waveform displayed on the screen will change in conjunction with the setting of Acquire menu. Figure 2- 69 Signal that contains noise, and without average sampling Figure 2- 70 Display signal after average sampling © 2008 RIGOL Technologies, Inc. 2-54 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 85 Stop Acquisition: When the scope is acquiring waveforms, the waveforms is in a live status; when acquisition is stopped, frozen waveform will be displayed, the position and scale can still be adjusted by vertical control and horizontal control. 2-55 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 86 2 to 256. Peak Detect Acquisition: Peak Detect mode captures the maximum and minimum values of a signal. Finds highest and lowest record points over many acquisitions. © 2008 RIGOL Technologies, Inc. 2-56 User’s Guide for DS1000E, DS1000D Series Arrow.com.

  • Page 87: To Set Up The Display System

    “OFF”. Turn off the persistence function Set up waveform intensity, the Intensity < > range is from 0% to 100% percentage 2-57 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 88 Adjusting waveform intensity Default setup of multi-function knob ( ) is adjusting waveform intensity. © 2008 RIGOL Technologies, Inc. 2-58 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.

  • Page 89: To Store And Recall

    (see table 2-48) Go to menu for external memory External operation (see table 2-49) Go to disk manage menu (see Disk Mana. table 2-50) 2-59 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 90 Go to menu for external memory External operation (see table 2-49) Go to disk manage menu Disk Manage (see table 2-50) NOTE : Applicable to DS1000D Series only. © 2008 RIGOL Technologies, Inc. 2-60 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 91 Storage Factory Recall factory setups Load Recall factory setups or files Go to disk manage menu (see Disk Mana. table 2-50) 2-61 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 92 Save waveform files and setup Save files to the internal memory location Delete File Delete the selected location file (Folder) (folder) © 2008 RIGOL Technologies, Inc. 2-62 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 93 Load USB storage device. Path Back to previous folder Current directory Files File information. Figure 2- 83 File system display 2-63 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 94 Table 2- 52 The Disk Manage Menu (Page 2/2) Menu Settings Comments Rename To rename a file (see table 2-52) Disk info Display disk information © 2008 RIGOL Technologies, Inc. 2-64 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 95 Factory: The oscilloscope has default settings and can be recalled at anytime. Memory location: Specify memory location to save/recall the waves and setups. Load: Recall saved waveforms, setups and default settings. Save: Save waveforms and setups. 2-65 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 96 To ensure the setups being saved properly, only after the settings are changed for more than 5 seconds can the user turn off the instrument. The oscilloscope can store 10 settings permanently and can restore at anytime. © 2008 RIGOL Technologies, Inc. 2-66 User’s Guide for DS1000E, DS1000D Series Arrow.com.

  • Page 97: To Set Up The Utility System

    简体中文 繁体中文 Select languages English Language (More languages may be added in later 日本語 firmware versions) François … 2-67 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 98 Special Mode Lock/Unlock Lock the keyboard NOTE: Self-Calibration: Oscilloscope will calibrate parameter of vertical system (CH1, CH2, and Ext), horizontal system and trigger system. © 2008 RIGOL Technologies, Inc. 2-68 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 99 (PictBridge printer) to PictBridge printer (computer) by the USB Device port. 2-69 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 100 Press Utility→Language to select the language. Figure 2- 93 The Language menu Please use the fourth menu button or use the knob to select the language you need. © 2008 RIGOL Technologies, Inc. 2-70 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 101 Stop test when output occur on Output Continue test when output occur Mask Setting Go to mask setting menu NOTE : The beeper should be opened. 2-71 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 102 Recall mask setting file from Load internal memory Go to import/export menu (same as Imp./Exp. REF import/export menu. See table 2-10) © 2008 RIGOL Technologies, Inc. 2-72 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 103 Switch among Path, Directory and Explorer Directory File File Load Recall the specified file NOTE: Pass/Fail function is unavailable in X-Y mode. 2-73 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 104 Before connecting to an external circuit, make sure the maximum voltage/current does not exceed 400V/100mA. The output device has no polarity limit and can be connect arbitrarily. Figure 2- 100 Schematic Diagram of Pass/Fail output © 2008 RIGOL Technologies, Inc. 2-74 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 105 End Frame Set number of record frames <1-1000> Record stopped, press to (Run) Operate Start recording (Stop) Recording, press to stop 2-75 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 106 Start playback (Stop) Playing, press to stop Set repeat play mode Play mode Set single time play mode Interval Set up interval <1.00ms-20s> © 2008 RIGOL Technologies, Inc. 2-76 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 107 Set first frame to be saved <1-1000> End Frame Set last frame to be saved <1-1000> Internal Location Set up Store location external 2-77 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 108 See table 2-12) Load Go to load menu see table 2-63 Go to import menu. (same as REF Import import menu see table 2-14) © 2008 RIGOL Technologies, Inc. 2-78 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 109 If use Normal printer, please select “Normal” mode, and then connect the  oscilloscopes regarded as “Host equipment” and printer via USB Host port on the front panel. Figure 2- 109 Normal print 2-79 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 110 Print Mode Select the print mode PictBridge Print Execute print function Abort Stop print function Status Query the status of print job © 2008 RIGOL Technologies, Inc. 2-80 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 111 Make sure the Printer has been connected and the print settings are all ready before printing. Then, press Utility Print set Print to execute print operation. 2-81 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 112 Tradition Succinct Figure 2- 115 Table 2- 76 The Preference menu (2/2) Menu Display Comments Set Keys Set up new code © 2008 RIGOL Technologies, Inc. 2-82 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 113 4. Key Sets: This function help users to set new code to unlock the keyboard. 2-83 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 114 “AUTO” key to exit the system. Figure 2- 116 Self calibration NOTE: The oscilloscope must have been working or warm-up at least 30-minutes before running self-calibration to get best accuracy. © 2008 RIGOL Technologies, Inc. 2-84 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 115 Press Utility→System Info to enter the system information interface as follows. Figure 2- 117 System information interface 2-85 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 116 Press any button among F1 to F5 to enter the Unlock mode, then please input the unlock keys (the default is 111111, users can reset new keys with 6 bit length.) to unlock the keyboard. © 2008 RIGOL Technologies, Inc. 2-86 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 117 Enter, input your new code and ensure it again, the system will clew that you have finished new keys setting. Figure 2- 120 Interface of key resetting 2-87 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.

  • Page 118: To Measure Automatically

    Time Select to measure time parameter Clear Clear measurement result on screen Display Turn off all measurement results Turn on al measurement results © 2008 RIGOL Technologies, Inc. 2-88 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 119 Menu Settings Comments Measure overshoot in percentage Overshoot of an edge Measure preshoot in percentage of Preshoot an edge 2-89 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 120 Measure the signals delay between Delay1→2 two channels at the rising edge Measure the signals delay between Delay1→2 two channels at the falling edge © 2008 RIGOL Technologies, Inc. 2-90 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 121 Maximum 3 results could be displayed at the same time. When there is no room, the next new measurement result will make the previous results moving left out of screen. 2-91 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 122 Clear the measure values: press Clear and all of the auto measure values would disappear from the screen (except for “Display all” parameters). Clear measured data from screen Turn on/off the mass measurement Figure 2- 130 Measurement display © 2008 RIGOL Technologies, Inc. 2-92 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 123 Preshoot: Defined as (Vmin-Vbase)/Vamp, useful for square and pulse waveforms. Average: The arithmetic mean over the entire waveform. Vrms: The true Root Mean Square voltage over the entire waveform. 2-93 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 124 Phas 1→2 : The phase deviation between the two channels at the rising edge. Phas 1→2 : The phase deviation between the two channels at the falling edge. +Duty: +Duty Cycle, defined as +Width/Period -Duty: -Duty Cycle, defined as -Width/Period © 2008 RIGOL Technologies, Inc. 2-94 User’s Guide for DS1000E, DS1000D Series Arrow.com.

  • Page 125: To Measure With Cursors

    These cursors demonstrate the electrical meanings of these measurements. NOTE: The Auto Measure mode for Cursor measuring will take no effect without automatic measurements. 2-95 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.
  • Page 126 Figure 2- 135 Manual Measure Mode of Cursor Measurement © 2008 RIGOL Technologies, Inc. 2-96 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 127 Position of Cursor B (same as above). △ Horizontal space between cursor A and B ( X): Time between cursors X), units in Hz, kHz, MHz, GHz. 2-97 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 128 Cursor X: Cursor X appears as vertical lines on the display to measure horizontal parameters. Usually it indicates the time of trigger excursion. When the source is set as FFT, X means frequency. © 2008 RIGOL Technologies, Inc. 2-98 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 129 Note: horizontal coordinate represents time value, vertical coordinate represents voltage value. Figure 2- 137 Track Measure Mode of Cursor Measurement 2-99 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 130 X), units in Hz, kHz, MHz, GHz. △ Vertical space between cursor 1 and 2 ( Y): Voltage between cursors, units in V. © 2008 RIGOL Technologies, Inc. 2-100 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 131 There will be no cursor display if no parameters are chosen in Measure menu. The oscilloscope could move cursor automatically to measure 22 parameters in Measure menu. Figure 2- 139 Auto Measure Mode of Cursor Measurement 2-101 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.

  • Page 132: To Use Run Control Buttons

    Fall Edge time automatically Press to cancel all the Auto Set actions, the oscilloscope will (Cancel) recover to its previous status © 2008 RIGOL Technologies, Inc. 2-102 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 133 NOTE: The volts/div and horizontal time base can be adjusted in a fixed limit. That is, to zoom in/out the signal in vertical and horizontal directions. 2-103 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 134 Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.

  • Page 135: Chapter 3 Application & Examples

    Press Time→Freq to select frequency measurements and the result will be displayed on the screen. NOTE: The frequency and peak-to-peak measurements are shown on the screen and are updated periodically. © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.

  • Page 136: Example 2: View A Signal Delay Caused By A Circuit

    (3) Press Delay 1→2 to display the result on the screen. You can see the change of the waveform in the following figure: Figure 3- 1 Waveform distortion © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.

  • Page 137: Example 3: Capture A Single-Shot Signal

    It is useful to observe the waveform before the occurrence of the noise. © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com.

  • Page 138: Example 4: To Reduce The Random Noise On A Signal

    8 kHz. Use LF Reject to remove low frequency signals such as power line noise from the trigger path. 4. To reduce the noise by setting the acquisition type and adjust the waveform intensity. © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 139 (2) To reduce the noise it can also be achieved by reducing the intensity of the display. NOTE: It is normal that the refresh rate will slow down when the average acquisition mode is ON. © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.

  • Page 140: Example 5: Making Cursor Measurements

    ) knob to place cursor B on the second peak of the wave. Observe the delta in time and frequency displayed on the screen. Figure 3- 4 Waveform display © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.
  • Page 141 The delta voltage (peak-to-peak voltage of the waveform)  The voltage at Cursor 1  The voltage at Cursor 2  Figure 3- 5 Waveform display © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.

  • Page 142: Example 6: The Application Of The X-Y Operation

    8. Adjust the vertical knobs to a desirable waveform display. 9. Apply the Ellipse method to observe the phase difference between the two channels. (See Figure 3-6) © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 143 If the main axis of the ellipse is at I and III quadrant, θ must be in the range of (0~π/2) or (3π/2~2π). If the main axis is at II and IV quadrant, θ must be in the range of (π/2~π) or (π~3π/2). © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com.

  • Page 144: Example 7: Triggering On A Video Signal

    The oscilloscope triggers on the Odd field or Even field. To avoid confusion when Odd field and Even field trigger simultaneously, choose Odd field or Even field as in step 5 above. © 2008 RIGOL Technologies, Inc. 3-10 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 145 8. Turn the horizontal knob to observe a complete waveform on the screen. Figure 3- 8 Waveform display © 2008 RIGOL Technologies, Inc. 3-11 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.

  • Page 146: Example 8: Fft Cursor Measurement

    ) knob to move the cursor to an interesting point. Figure 3- 9 The example of Cursor measuring FFT amplitude Figure 3- 10 The example of Cursor measuring FFT frequency © 2008 RIGOL Technologies, Inc. 3-12 User’s Guide for DS1000E, DS1000D Series Arrow.com.

  • Page 147: Example 9: Pass/Fail Test

    Create Mask to create a new mask. Press Output to select the expected outputting waveforms. Press Operate to start the test. Figure 3- 11 Waveform display © 2008 RIGOL Technologies, Inc. 3-13 User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.

  • Page 148: Example 10: Triggering On A Digital Signal

    5. Press Sweep to select trigger mode to: Auto, Normal, or Single 6. Press Set Up to adjust the Holdoff time. Figure 3- 12 Pattern Trigger on a digital signal © 2008 RIGOL Technologies, Inc. 3-14 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 149 8. Press Set Up to adjust the Holdoff time. Figure 3- 13 Duration Trigger on a digital signal Figure 3- 14 Duration Trigger on a digital signal © 2008 RIGOL Technologies, Inc. 3-15 User’s Guide for DS1000E, DS1000D Series Arrow.com.
  • Page 150 Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.

  • Page 151: Chapter 4 Troubleshooting

    (2) Check if the power switch is turned on. (3) After the above inspection, restart the oscilloscope. (4) If the problem still remains, please contact RIGOL for help. 2. After the signal acquisition the waveform does not appear: (1) Check if the probes are correctly connected with the signals.
  • Page 152 (2) Maybe the display Type is set to “Vectors” set it to “Dots” mode to improve the display. © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.

  • Page 153: Chapter 5 Specifications

    Do perform Self Calibration operation through the Utility menu, if the range of  operating temperature variations up to or more than 5°C. NOTE: All specifications are guaranteed unless where marked “typical”. © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.

  • Page 154: Specifications

    Dual channel 500MSa/s 8kpts N.A. or lower Dual channel 250MSa/s 8kpts 512kpts or lower Scanning Speed 2ns/div~50s/div, DS1102X © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 155 ±4% (Normal or Average acquisition mode) 10mV/div-10V/div: ±3% (Normal or Average acquisition mode) DC Measurement Average of ≥16 Waveforms with vertical position at zero: Accuracy, Average ±(DC Gain Accuracy×reading+0.1div+1mV) © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 156 Video Standard & Support for standard NTSC, PAL and SECAM broadcast Line Frequency systems. Line number range: 1~525 (NTSC) and 1~625 (PAL/SECAM) Slope Trigger © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 157 +Duty, -Duty, Delay1→2 , Delay1→2 , Phas 1→2 , Phas 1→2 Remarks: [1] When sampling is 1GSa/s, only single channel can be used. [2] For DS1000D Series © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com.

  • Page 158: General Specifications

    Mechanical Size Width 303mm Height 154mm Depth 133 mm Heavy Without package 2.3 kg Packaged 3.5 kg © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 159 RIGOL IP Protection IP2X Calibration Interval The recommended calibration interval is one year © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 160 Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.

  • Page 161: Chapter 6 Appendix

     RS232 Cable  USB-GPIB Adapter  DS1000E, DS1000D Soft Carrying Case  All accessories (standard and optional) are available by contacting your local RIGOL office. © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com.

  • Page 162: Appendix B: Warranty

    To get repair service, please contact with your nearest RIGOL sales or service office. There is no other warranty, expressed or implied, except such as is expressly set forth herein or other applicable warranty card.

  • Page 163: Appendix C: Care And Cleaning

    When cleaning the LCD, take care to avoid scarifying it. WARNING: To avoid injury resulting from short circuit, make sure the instrument is completely dry before reconnecting into a power source. © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com.

  • Page 164: Appendix D: Contact Us

    Appendix D: Contact Us If you have any problem or requirement when using our products or this manual, please contact RIGOL. E-mail: service@rigol.com Website: www.rigol.com © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com.

  • Page 165: Index

    Single Trigger ......2-52 GND Coupling ......2-4 Slope Trigger......2-39 Hamming Window..... 2-12 STORAGE ......... 2-59 Hanning Window ...... 2-12 Sync Pulses ......2-41 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
  • Page 166 Vertical Window ....... 1-13 Trigger System ......2-34 Video Trigger ......2-40 UTILITY ........2-67 X-Y ......... 2-29 Vertical ........5-3 Y-T ......... 2-29 © 2008 RIGOL Technologies, Inc. User’s Guide for DS1000E, DS1000D Series Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.

This manual is also suitable for:

Ds1000d seriesDs1102eDs1052eDs1102dDs1052d

Table of Contents