Display:grid; Display:mpersistence - Rigol DS4000E Series Programming Manual

Chapter 2 Command System
0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20: sets the persistence time to a specific value to observe glitch that

changes relatively slowly or glitch with low occurrence probability.
INFinite: sets the persistence time to infinite (the oscilloscope displays the newly acquired waveform

without clearing the waveform formerly acquired) to measure noise and jitter as well as capture
incidental events.
Return Format
The query returns MIN, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, or INF.

:DISPlay:GRID

Syntax
:DISPlay:GRID <grid>
:DISPlay:GRID?
Description
Sets or queries the display type of the screen grid.
Parameter
Name Type
<grid> Discrete
Remarks
FULL: displays the background grid and the coordinate.

HALF: does not display the background grid, but only the coordinate.

NONE: neither displays the background grid nor the coordinate.

Return Format
The query returns FULL, HALF, or NONE.

:DISPlay:MPERsistence

Syntax
:DISPlay:MPERsistence <time>
:DISPlay:MPERsistence?
Description
Sets or queries the menu display time. The default unit is s.
Parameter
Name Type
<time> Discrete
Return Format
The query returns 1, 2, 5, 10, 20, or INF.
DS4000E Programming Guide
Range
{FULL|HALF|NONE}
Range
{1|2|5|10|20|INFinite}
RIGOL
Default
FULL
Default
INFinite
2-83