RIGOL
:DISPlay:TYPE
Syntax
:DISPlay:TYPE <type>
:DISPlay:TYPE?
Description
Sets or queries the display type of the waveform.
Parameter
Name
Type
<type>
Discrete
Remarks
VECTors: The sample points are connected by lines and displayed. Normally, this mode can provide the
most vivid waveform to view the steep edge of the waveform (such as square waveforms).
DOTS: displays the sample points directly. You can directly view each sample point and use the cursor
to measure X and Y values at this sample point.
Return Format
The query returns VECT or DOTS.
:DISPlay:WBRightness
Syntax
:DISPlay:WBRightness <bright>
:DISPlay:WBRightness?
Description
Sets or queries the display brightness of the waveform on the screen (in percentage).
Parameter
Name
Type
<bright>
Integer
Return Format
The query returns an integer between 0 and 100.
2-84
Range
{VECTors|DOTS}
Range
0 to 100
Chapter 2 Command System
Default
VECTors
Default
50
DS4000E Programming Guide