Chapter 2 Command System
:RECall Commands
Command List:
:RECall:MTESt
:RECall:REFerence
:RECall:SETup
:RECall:TRACe
:RECall:WAVeform
:RECall:MTESt
Syntax
:RECall:MTEst <file_spec>
Description
Recalls the pass/fail test mask file stored in the external memory.
Parameter
Name
Type
<file_spec>
ASCII String
Remarks
Before using the command to recall the pass/fail test mask file, send the :MASK:ENABle command first to
enable the pass/fail test function and ensure that the specified file has been stored in the specified location.
otherwise, this command is invalid.
:RECall:REFerence
Syntax
:RECall:REFerence <file_spec>
Description
Recalls the reference waveform file stored in the external memory.
Parameter
Name
Type
<file_spec>
ASCII String
Remarks
Before using the command to recall the reference waveform file, send the :REFerence:DISPlay command
first to enable the REF function and ensure that the specified file has been stored in the specified location.
otherwise, this command is invalid.
DS4000E Programming Guide
Range
<file_spec> includes the file storage location and
the filename with a suffix. Its length cannot
exceed 64 characters. If the USB storage device is
inserted into the USB HOST interface of the rear
panel, the storage location is E:\; if inserted into
the USB HOST interface of the front panel, the
storage location is D:\. For example, E:\123.pf
Range
<file_spec> includes the file storage location and
the filename with a suffix. Its length cannot
exceed 64 characters. If the USB storage device is
inserted into the USB HOST interface of the rear
panel, the storage location is E:\; if inserted into
the USB HOST interface of the front panel, the
storage location is D:\. For example, E:\123.ref
RIGOL
Default
--
Default
--
2-167