Recall:waveform - Rigol DS4000E Series Programming Manual
Digital oscilloscope
Hide thumbs
Also See for DS4000E Series:
- User manual (329 pages) ,
- Quick manual (36 pages) ,
- User manual (42 pages)
Table of Contents
Advertisement
Chapter 2 Command System
:RECall:WAVeform
Syntax
:RECall:WAVeform <file_spec>
Description
Recalls the waveform file stored in the external memory.
Parameter
Name
Type
<file_spec>
ASCII String
Remarks
Before using the command to recall the waveform file, ensure that the specified file has been stored in the
specified location. otherwise, this command is invalid.
DS4000E Programming Guide
Range
<file_spec> includes the file storage location and the
filename with a suffix. Its length cannot exceed 64
characters. If the USB storage device is inserted into the
USB HOST interface of the rear panel, the storage
location is E:\; if inserted into the USB HOST interface of
the front panel, the storage location is D:\. For example,
E:\123.wfm
RIGOL
Default
--
2-169
Advertisement
Table of Contents
