RIGOL
Chapter 2 Command System
:TFORce
Syntax
:TFORce
Description
Generates a trigger signal forcefully. This command is only applicable to the normal and single trigger
modes, refer to the :TRIGger:SWEep command. This command functions the same as the FORCE key in
the trigger control area of the front panel.
:TLHAlf
Syntax
:TLHAlf
Description
Sets the trigger level to the vertical midpoint of the amplitude of a trigger signal. This command functions
the same as the 50% key in the trigger control area of the front panel.
DS4000E Programming Guide
2-3