Bus<N> Commands; Bus<N>:Data - Rigol DS4000E Series Programming Manual

Chapter 2 Command System
:BUS<n> Commands
Command List:
:BUS<n>:DATA?

:BUS<n>:DISPlay

:BUS<n>:EEXPort

:BUS<n>:EVENt

:BUS<n>:FORMat

:BUS<n>:MODE

:BUS<n>:CAN (Option)

:BUS<n>:FLEXray (Option)

:BUS<n>:IIC (Option)

:BUS<n>:PARallel

:BUS<n>:RS232 (Option)

:BUS<n>:SPI (Option)

:BUS<n>:DATA?
Syntax
:BUS<n>:DATA?
Description
Reads the data in the decoding event table.
Parameter
Name Type
<n> Discrete
Return Format
Returns the data in the decoding event table with the following formats.
#9000000077Parallel
Time,Data,
-9.3508796E-04,1,
6.5072008E-05,1,
1.0636000E-03,1,
Wherein, "#9000000077" is the TMC data block header, which is followed by the data in the event table.
The 9-digit data following #9 in the data block header indicates the number of bytes of the effective data.
"Parallel" indicates the decoding type. The available decoding type can also be RS232, I2C, SPI, CAN, or
Flex. The data are separated by colons, and will automatically switch to the next line according to the line
length limit in the decoding list. The data value is related to the set numeral system.
Note: You can save all the data except TMC data block header (#9) and decoding type (Parallel) as the
"*.csv" file and view the data in the form of a list.
DS4000E Programming Guide
Range
{1|2}
RIGOL
Default
--
2-7