Function:wrecord - Rigol DS4000E Series Programming Manual

Chapter 2 Command System

:FUNCtion:WRECord

Command List:
:FUNCtion:WRECord:FEND

:FUNCtion:WRECord:FMAX?

:FUNCtion:WRECord:INTerval

:FUNCtion:WRECord:OPERate

:FUNCtion:WRECord:FEND
Syntax
:FUNCtion:WRECord:FEND <frame>
:FUNCtion:WRECord:FEND?
Description
Sets or queries the end frame of the waveform recording in the recording mode. The oscilloscope stops the
recording operation automatically when the number of recorded frames reaches the set end frame.
Parameter
Name Type
<frame> Integer
Return Format
The query returns an integer.
:FUNCtion:WRECord:FMAX?
Syntax
:FUNCtion:WRECord:FMAX?
Description
Queries the maximum number of frames that can be recorded currently in the recording mode.
Remarks
The maximum number of frames that can be recorded is the maximum number of end frames of

waveform recording that can be set (refer to the :FUNCtion:WRECord:FEND command).
The maximum number of frames that can be recorded is related to the currently selected memory

depth (refer to the :ACQuire:MDEPth command).
Memory Depth
7 kpts
70 kpts
700 kpts
7 Mpts
AUTO
Return Format
The query returns an integer.
DS4000E Programming Guide
Range
1 to the maximum number of frames that can be
recorded currently
Maximum Number of Frames
31986
1999
249
31
Related to the current "Sample Rate" and "Horizontal Time Base" (refer to
the :TIMebase[:MAIN]:SCALe command).
RIGOL
Default
7996
2-87