Bus<N>:Can (Option) - Rigol DS4000E Series Programming Manual

RIGOL
:BUS<n>:CAN (Option)
Command List:
:BUS<n>:CAN:BAUD

:BUS<n>:CAN:BUSer

:BUS<n>:CAN:OFFSet

:BUS<n>:CAN:SOURce

:BUS<n>:CAN:SPOint

:BUS<n>:CAN:STYPe

:BUS<n>:CAN:THReshold

:BUS<n>:CAN:BAUD
Syntax
:BUS<n>:CAN:BAUD <baud>
:BUS<n>:CAN:BAUD?
Description
Sets or queries the signal rate of CAN decoding on the specified bus. The default unit is b/s.
Parameter
Name Type Range
<n> Discrete {1|2}
<baud> Discrete {100000|125000|250000|400000|500000|800000|1000000|USER}
Remarks
When <baud> is set to "USER", you can use the :BUS<n>:CAN:BUSer command to self-define the signal
rate of CAN decoding on the specified bus.
Return Format
The query returns 100000, 125000, 250000, 400000, 500000, 800000, 1000000, or USER.
:BUS<n>:CAN:BUSer
Syntax
:BUS<n>:CAN:BUSer <baud>
:BUS<n>:CAN:BUSer?
Description
Sets or queries the user-defined signal rate of CAN decoding on the specified bus. The default unit is b/s.
Parameter
Name Type Range
<n> Discrete {1|2}
<baud> Integer 10000 to 1000000
Return Format
The query returns an integer between 10000 and 1000000.
2-10
Chapter 2 Command System
Default
--
500000
Default
--
500000
DS4000E Programming Guide