System:pon; System:pstatus; System:ramount - Rigol DS4000E Series Programming Manual

Chapter 2 Command System

:SYSTem:PON

Syntax
:SYSTem:PON <pon>
:SYSTem:PON?
Description
Sets or queries the system configuration recalled by the oscilloscope when it is powered on again after
power-off.
Parameter
Name Type
<pon> Discrete
Remarks
LATest: restores the oscilloscope to the system configuration at the last power-off.

DEFault: restores the oscilloscope to the factory setting.

Return Format
The query returns LAT or DEF.

:SYSTem:PSTatus

Syntax
:SYSTem:PSTatus <status>
:SYSTem:PSTatus?
Description
Sets or queries the power status of the oscilloscope after power-on.
Parameter
Name Type
<status> Discrete
Remarks
DEFault: after the oscilloscope is powered on, you need to press the power key on the front panel to

start the oscilloscope.
OPEN: after the oscilloscope is powered on, it starts directly. In this case, you can still press the power

key on the front panel to turn on or off the instrument.
Return Format
The query returns DEF or OPEN.

:SYSTem:RAMount?

Syntax
:SYSTem:RAMount?
Description
Queries the number of analog channels of the instrument.
Return Format
For this oscilloscope, the query always returns 4.
DS4000E Programming Guide
Range
{LATest|DEFault}
Range
{DEFault|OPEN}
RIGOL
Default
--
Default
--
2-185