Measure:marea - Rigol DS4000E Series Programming Manual

Chapter 2 Command System

:MEASure:MARea

Syntax 1
:MEASure:MARea [<chan>]
Description 1
Measures the area of the specified source channel.
Syntax 2
:MEASure:MARea? [<chan>]
Description 2
Measures and queries the area of the specified source channel. The default unit is volt-second.
Parameter
Name Type
<chan> Discrete
Remarks
Area: The horizontal axis denotes time and the vertical axis denotes waveform amplitude. The

oscilloscope calculates the area (namely the integral of the time and amplitude) of the waveform
within the current measurement range (refer to the :MEASure:AREA command).
Before making measurements, turn on the channels to be measured.

When the math operation type is FFT (refer to the :CALCulate:MODE command), <chan> cannot be

set to "MATH".
When [<chan>] is omitted, the command, by default, applies to the currently set measurement source

(refer to the :MEASure:SOURce command).
Return Format
The query returns the measurement results in scientific notation. When the measurement results are
invalid, the query returns 9.9e37.
:MEASure:MARea:SAVerage
:MEASure:MARea:SCURrent
:MEASure:MARea:SDEViation
:MEASure:MARea:SMAXimum
:MEASure:MARea:SMINimum
Syntax 1
:MEASure:MARea:SAVerage [<chan>]
:MEASure:MARea:SCURrent [<chan>]
:MEASure:MARea:SDEViation [<chan>]
:MEASure:MARea:SMAXimum [<chan>]
:MEASure:MARea:SMINimum [<chan>]
Description 1
Measures the area of the specified source channel and enables the statistic function of the measurement
results.
Syntax 2
:MEASure:MARea:SAVerage? [<chan>]
:MEASure:MARea:SCURrent? [<chan>]
:MEASure:MARea:SDEViation? [<chan>]
:MEASure:MARea:SMAXimum? [<chan>]
:MEASure:MARea:SMINimum? [<chan>]
DS4000E Programming Guide
Range
{CHANnel1|CHANnel2|CHANnel3|CHANnel4|MATH}
RIGOL
Default
--
2-129