Calculate:multiply - Rigol DS4000E Series Programming Manual

RIGOL

:CALCulate:MULTiply

Command List:
:CALCulate:MULTiply:INVert

:CALCulate:MULTiply:SA

:CALCulate:MULTiply:SB

:CALCulate:MULTiply:VOFFset

:CALCulate:MULTiply:VSCale

:CALCulate:MULTiply:INVert
Syntax
:CALCulate:MULTiply:INVert <bool>
:CALCulate:MULTiply:INVert?
Description
Enables or disables the invert display of the multiplication operation waveform; or queries the on/off status
of the multiplication operation waveform.
Parameter
Name Type
<bool> Bool
Remarks
1|ON: turns the waveform invert on. The waveform voltage values are inverted and then displayed.

0|OFF: turns the waveform invert off. The waveform is displayed normally.

Return Format
The query returns 1 or 0.
:CALCulate:MULTiply:SA
:CALCulate:MULTiply:SB
Syntax
:CALCulate:MULTiply:SA <source>
:CALCulate:MULTiply:SA?
:CALCulate:MULTiply:SB <source>
:CALCulate:MULTiply:SB?
Description
Sets or queries the channel source of Source A or Source B in multiplication operation.
Parameter
Name Type
<source> Discrete
Return Format
The query returns CHAN1, CHAN2, CHAN3, or CHAN4.
2-54
Range
{{1|ON}|{0|OFF}}
Range
{CHANnel1|CHANnel2|CHANnel3|CHANnel4}
Chapter 2 Command System
Default
0|OFF
Default
CHANnel1
DS4000E Programming Guide