Rst; Sre; Stb - Rigol DS4000E Series Programming Manual

RIGOL
Return Format
The query returns 1 if the current operation is finished; otherwise, the query returns 0.

*RST

Syntax
*RST
Description
Restores the instrument to its factory default settings.

*SRE

Syntax
*SRE <mask>
*SRE?
Description
Sets or queries the enable register of the status byte register set.
Parameter
Name Type
<mask> Integer
Remarks
<mask> is the binary-weighted sum of all the bits from bit 0 to bit 7. "1" denotes enabling the
corresponding bit; and "0" denotes disabling the corresponding bit. The bits in the status byte register are
defined as follows:
Bit Weight
7 128
6 64
5 32
4 16
3 8
2 4
1 (Not used) 2
0 (Not used) 1
Return Format
The query returns an integer (corresponds to the binary-weighted sum of all the bits) between 0 and 255.

*STB?

Syntax
*STB?
Description
Queries the condition register of the status byte register set.
Remarks
For the definitions of the bits in the status byte register, refer to the *SRE command.
2-102
Range Default
0 to 255 0
Name Enable
OPER Operation Status Reg
-- Not used
ESB Event Status Bit
MAV Message Available
-- Not used
MSG Message
USR User
TRG Trigger
Chapter 2 Command System
DS4000E Programming Guide