Save/Recall Commands - Rigol DS1204B Programming Manual

Command Systems

SAVe/RECall Commands

SAVe/RECall Commands are used to save and recall the waveform data and image on
the screen.
SAVe/RECall Commands include:
:SAVERECALL:TYPE

:SAVERECALL:LOCation

:SAVERECALL:LOAD

:SAVERECALL:SAVe

:SAVe:IMAGe:STARt

:SAVe:IMAGe:FACTors

:SAVe:IMAGe:FORMat

:SAVe:WAVeform:STARt

:SAVe:SETup:STARt

:SAVe:CSV:STARt

:RECall:WAVeform:STARt

:RECall:SETup:STARt

We will give detailed introductions for each command in the following parts.
Programming Guide for DS1000B Series
RIGOL
2-97