To Store And Recall Waveforms Or Setups - Rigol DS1302CA User Manual

To Store and Recall Waveforms or Setups

Figure 2-65 shows the menu button for the storage system on the front panel.
Press the Storage button, the interface menu for settings shows as follows.
Figure 2-66 Table 2-38 The Storage menu (Waveform or Setups storage)
NOTES:
[1] The waveform and setups files in internal memory can be saved, loaded and
deleted. While, the waveform, setups, bit map and CSV files in external memory
can be created and deleted. To restore the factory settings, please select
"Factory".
[2] Both waveforms and status settings could be saved in "Waveform Storage".
User‟s Guide for DS1000CA Series
Figure 2-65 Storage button
Menu Settings
Waveform
Setups
[1]
Storage Bit map
CSV
Factory
Internal
External
Disk Mana.
Storage Setup Button
Comments
[2]
Store or recall waveform.
Store or recall instrument setups.
Create or delete bit map files.
Create or delete CSV files.
Recall factory setups.
Go to menu for internal memory
operation (see Table 2-42).
Go to menu for external memory
operation (see Table 2-43).
Go to disk manage menu (see
Table 2-44).
RIGOL
2-51