Turn signals - US and Canada
Markets Only
Warning
Make sure the motorcycle is stabilized
and adequately supported.
A correctly supported motorcycle will
help prevent it from falling.
An
unstable
motorcycle
causing injury to the operator or
damage to the motorcycle.
2
celc_2
1.
Turn signal lens
2.
Fastener
Loosen the fastener and remove the
▼
lens to gain access to the bulb for
replacement.
LED Turn Signals - All
Markets Except US and
Canada
The LED turn signals are sealed for life
units and must be replaced in the event
of a failure.
Brake/Tail Light
The
maintenance free LED unit. The tail light
unit must be replaced in the event of
the failure of the tail light.
License Plate Light
Bulb Replacement
Loosen the fastener and detach the
may
fall,
▼
license plate light from the license
plate bracket.
1
1
IASM00175
1.
Fastener
2.
Lens
3.
Bulb
Replace the bulb,
▼
Reinstall the lens and tighten its
▼
fastener to 9 lbf in (9 lbf in (1 Nm)).
MAINTENANCE
tail
light
unit
3
2
189
is
a
sealed,