Intelligent Alarm - EverFocus H.265 VANGUARD II Series User Manual

4.3.3

Intelligent Alarm

After configuring the Intelligent functions settings, you can further configure the Alarm
settings for each intelligent function. To configure the Intelligent functions, click the
Intelligent button to enter each intelligent function setup page (please refer to 4.1.8
Intelligent).
The Intelligent Alarm setup configurations for each intelligent function are similar. Here we
use Perimeter Intrusion alarm setup page for example.
Channel: Displays the channel number.
Buzzer: Select a time for DVR buzzer to sound when an event is triggered. Select Disable to
disable the function.
Alarm Out: Select an external alarm output device connected to the DVR (Local), IPCam (CH)
or both (All).
Alarm Output: Select an alarm output time (duration) when events occur. When an event is
triggered, the alarm will last based on the setup latch time.
Record: Click and select the desired channel(s) you want to record when an event is
triggered on this channel. Note that for recording function to work, the Record Schedule
function has to be configured (please refer to 4.1.8.9 Record Schedule).
Post Recording: Select a post recording time when an event is triggered.
Show Message: Check the box to display an Intelligent event icon "S" or intelligent messages
on the live channel when an event is triggered.
Send Email: Check the box to enable the Email alert function. When an event is triggered, the
DVR will send an email alert with a snapshot to the pre-configured Email receiver. Note that
71
H.265 VANGUARD II Series