Record - EverFocus VANGUARD 16x8 User Manual

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2

4.1.1.2 Record

You can configure the record settings on this page.
4.1.1.2.1 Record
You can configure the basic record settings on this page.
Channel: Select a channel to configure the record setting individually.
Enable Channel: Select Enable to enable the record function.
Record Stream: Select Main Stream or Sub Stream to record on this channel.
Pre-Record: Select Enable to enable pre-recording for motion detection or I/O trigger record.
Copy: You can apply the same configurations from one channel to the desired channels.
Select a channel from the Copy drop-down list first and then select a desired channel (or All)
from the To drop-down list, click the Copy button, the selected channel(s) will be applied
with the same configurations.
Click Default to return to factory default value, Save to save the settings, or Cancel to cancel
and leave the page.
37