Output - EverFocus VANGUARD 16x8 User Manual

VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2

4.1.1.1.4 Output

You can configure the Main monitor and Call monitor settings on this page.
Main Monitor Setting
Video Output: Select Live Output (Main Monitor) and then configure the below Main
Monitor settings.
Sequence Layout: Select a layout for the sequence mode. For example, if you select Layout4,
the DVR will display a quad view layout for all channels in sequence order. To start the
sequence mode, on the Live View screen, click the Start Sequence icon on the OSD Root
menu. Click the button again to stop sequence mode.
Sequence Dwell Time: Select a sequence dwell time in second. By default, 5 seconds is set
up.
Output Resolution: Select a live resolution to be displayed on the output monitor.
Transparency: Slide the bar to the left or right to adjust the transparency for the OSD menu.
Monitor Auto Scan: Check the box to enable the Monitor Auto Scan function. The system
will apply the resolution best suit the connected monitor.
Click Default to return to factory default value, Save to save the settings, or Cancel to cancel
and leave the page.
34