Video Cable / Power-Out Cable - EverFocus EMV800 HD User Manual

EMV800 HD / EMV1200 HD Mobile DVR
2.5.2

Video Cable / Power-Out Cable

The mobile DVRs have 1 / 2 / 3 Video In ports for connecting 4 / 8 / 12 analog cameras using
the supplied Video Cables. (Note that HD-TVI / HD-CVI / HD-SDI cameras are not supported.)
The Video Cables are all labeled with VIN 1~ VIN 4, and you can connect any Video Cable to
any of the Video In ports on the mobile DVR. If the Video Cable connects to 5-8 CH Video In
port, the cable labeled as VIN 1 will be channel 5 and so forth.
(The following figure uses EMV1200 HD as an example).
EMV1200 HD (Rear Panel)
Video Input
Ports
Power-Out
Cable
1 ~ 12
Video Cable
Video Cable Video Cable
Camera 5 ~ 8
Camera 1 ~ 4 Camera 9 ~ 12
You can also use the supplied Power-Out Cable to power on the connected cameras. One
Power-Out Cable provides four set of power output wires (+/-). Each set of power output
wires provides 12VDC, 500mA power.
- (black)
+ (black with white stripe)
20