Web-Based User Interface Help Files; Accessing The Web-Based User Interface; Page Overview - Extron electronics StudioStation 100 User Manual

Web-Based User Interface Help Files

The StudioStation 100 web-based user interface contains an extensive set of help
files to assist with the connection, configuration, monitoring, and operation of the
StudioStation 100. To access the help files, click on the question mark (
corner of the web page (see figure 9).

Accessing the Web-Based User Interface

To access the embedded web page user interface, connect a control PC to the LAN port of
the StudioStation 100, or to the same network shared by the StudioStation 100, and open
a web browser. Enter the IP address of the StudioStation 100 (the default IP address is
192.168.254.253
configured), enter the
The main user interface opens to the
Figure 9.

Page Overview

The StudioStation 100 pages are organized by function and further organized within those
main functions. Click the tabs to open the pages.
Tabs
The pages in the StudioStation 100 are grouped within six main tabs at the top of the
screen:
1
Figure 10.
1
) into the browser address field. If necessary (if the unit has already been
username
StudioStation 100 Device Status Embedded Web Page
2 3
Six Main Function Tabs
— This single page provides a view of the status of the input and
Device Status
outputs, along with details of the active recording and stream or streams (the current
event). The URLs of the stream or streams are also displayed on this page.
and to log in, then click
password
page (see figure 9).
Device Status
4
StudioStation 100 • Web-Based User Interface
) in the upper right
?
or .
Log In OK
5 6
21