Using The Configuration Page; System Settings Screen - Extron electronics Multi-Graphic Processor MGP 464 User Manual

HTML Configuration and Control, cont'd

Using the Configuration Page

There are six Configuration Web pages, which only administrators can access.
These pages are listed in the sidebar menu at the left of the Configuration screen.
The following sections describe the changes you can make from these screens.

System Settings screen

On the System Settings screen (shown below), you can set date and time
parameters, and change the IP information for the MGP 464.
System Settings screen
To change your system settings,
1.
2.
3.
4.
5-4 MGP 464 • HTML Configuration and Control
On the Configuration tab, select System Settings from the sidebar menu at the
left edge of the screen.
Select or enter the new information in the desired field(s) in either the IP
Settings or the Date/Time Settings section.
When you have made all the desired inputs in one section, click the Submit
button at the bottom of the section. The new settings appear in the fields.
Follow steps 2 and 3 to make changes in the other section, if needed.