Accessing The Web Page; Accessing The Default Web Page - Extron electronics Annotator 300 User Manual

Accessing the
Web Page
This section describes how to access the default web page and the web page contents.
The web page is is always available and cannot be erased or overwritten. Topics that are
covered here are:
•
•

Accessing the Default Web Page

Access the Annotator 300 on-board web page as follows:
1.
2.
3.
4.
Accessing the Default Web Page
Navigating the Default Web Page
Double click the web browser icon on the PC desktop to launch the web browser.
Click in the browser Address field.
Enter the unit IP address in the browser's Address field.
NOTE: If the local system administrators have not changed the value, the factory-
specified default, 192.168.254.254, is the correct value for this field.
Alternatively, to have the browser display a page other than the default Home page
(for instance, such as a custom page that you have created and uploaded), enter a
slash (/) and the file name to open.
• The browser Address field should display the address in the following format:
xxx.xxx.xxx.xxx/{optional_file_name.html}
• The following characters are invalid in file names: {space} ~ @ = ' [ ] { } < >
' " ; : | \ and ?.
Press the <Enter> key. The Annotator 300 web page launches.
If a password is required, a pop-up appears asking for the username and password.
Type in the appropriate information and click OK (or Sign In, depending on your
web browser).
NOTE: The factory configured password for the device is the serial number. In
the event of a complete system reset, the password will convert to the default,
which is no password.
Annotator 300 • Accessing the Web Page 97