Diagnostic Test For Sram And Dram; Diagnostic Test For Lever Sensor - MUTOH ValueCut VC2-1800 Maintenance Manual

MAINTENANCE MANUAL

Diagnostic Test for SRAM and DRAM

This test provides the ability to diagnose the SRAM and DRAM. If these two components are bad, replace
them. Otherwise the cutting plotter will not work properly.

Diagnostic Test for Lever Sensor

It diagnoses the lever sensor. If the sensor is faulty, the cutting plotter cannot sense if the pinch rollers
have been lowered or not. If the lever sensor is down, the LCD displays "DOWN". If the lever sensor is up,
the LCD displays "UP". To return to the previous menu, Press the ON/OFF LINE key.
ON/OFF LINE key ENTER key
or
Lever sensor
VC2E-MM-00
47