Roll Length Menu; Cr Maintenance Menu - MUTOH ValueJet 1304 User Manual

4.6.18

Roll Length menu

Display information of the ink cassette that is installed in the cassette slot.
Setup item
Roll media
Roll media Length menu
Sets up the roll media length.
Note
When replacing the roll media, adjust the roll media length again. If the roll

media length is not set, the residual quantity of roll media is not displayed
correctly.
Setup item
Length
4.6.19

CR Maintenance menu

Use this to clean the wiper
Setup item
CR Maint
AP-75780 - Revision 1.3
Setting Description
<OFF> Roll length is not used
Roll 1
Roll 2 Sets up the roll media length.
Roll 3

---
Refer
Setting Description
1 m to <30 m> to 99
Sets the roll media length
m

---

Setting Description
Performs a maintenance. After pressing the
Start ENTER, the print head moves to the centre
and the cleaning wiper moves forward.
Complete maintenance.
End After pressing the ENTER, the print head and
the wiper return to their original position.

---
Refer
User's Guide ValueJet 1304
Handling the printer
CANCEL: cancels the settings and shifts to
the previous hierarchy.
to:Panel Setup Menu on page 62
ENTER: saves the settings and shifts to
the previous menu.
CANCEL: cancels the settings and shifts to
the previous hierarchy.
CANCEL: cancels the settings and shifts to
the previous hierarchy.
to:Panel Setup Menu on page 62
4
83