Maintenance; Cleaning The Cutting Plotter - MUTOH ValueCut II VC2-600 User Manual

ValueCut USER MANUAL

6 Maintenance

This chapter explains the basic maintenance (i.e. cleaning the cutting plotter) required for the cutting
plotter. Except for the procedures mentioned below, all other maintenance must be performed by a
qualified service technician.

6.1 Cleaning the Cutting Plotter

Cleaning the machine properly and regularly will ensure optimal performance out of your machine.
Cleaning Precaution !
Recommended Methods:

Gently wipe the cutting plotter surface with a lint-free cloth. If necessary, with a damp cloth
immersed in water or alcohol. Dry and wipe any remaining residue off a soft, lint-free cloth.

Wipe all dust and dirt from the tool carriage rails.

Use a vacuum cleaner to empty any accumulated dirt and media residue beneath the pinch roller
housing.

Clean the platen, paper sensors and pinch rollers with a damp cloth immersed in water or alcohol,
and dry with a soft, lint-free cloth.

Wipe dust and dirt from the stand.
VC2E-A-00

Unplug the cutting plotter before cleaning it in
order to prevent electrical shock.

Never use solvents, abrasive cleaners or strong
detergents for cleaning. They may damage the
surface of the cutting plotter and the moving parts.
67
Maintenance