Best E5 Series User Manual page 65

E5 User Manual
Param. Designation
P70.02 Function of STOP key
Frequency adjustment
P70.03
through keys ∧/∨
Step size of frequency
P70.04 adjustment through keys
∧/∨
LED displayed
P71.00 parameters setting 1 on
running status
3: Keys locked other than
STOP/RESET
4: Keys locked other than >>
0: STOP key valid only when
under keypad control
1: STOP key valid under any run
command source
Unit's place: option on stop
0: Clear on stop
1: Holding on stop
Decade: option on power loss
0: Clear on power loss
1: Holding on power loss
Hundreds place: integrating option
0: Integrating disabled
1: Integrating enabled
0.00Hz/s~10.00Hz/s
Group P71 LED Display Setting
Setting of binary system:
0: Display disabled
1: Display enabled
Unit's place:
BIT0: Running frequency (Hz)
BIT1: Command frequency (Hz)
BIT2: Bus voltage (V)
BIT3: Output current (A)
Decade:
BIT0: Output torque (%)
BIT1: Output power (kW)
BIT2: Output voltage (V)
BIT3: Motor speed (r/min)
Hundreds place:
BIT0: AI1 (V)
BIT1: AI2 (V)
BIT2: Reserved
BIT3: Reserved
Thousands place:
BIT0: DI
BIT1: External count value
BIT2: Reserved
- 61 -
Chapter 4 List of Parameters
Scope
Factory
Attr
Default
○
0
○
000
○
0.03 Hz/s
○
000F