Best E5 Series User Manual page 39

E5 User Manual
Param. Designation
Filtering time of digital
P20.11
input terminal
Delay time of terminal
P20.12
X1
Delay time of terminal
P20.13
X2
Digital input terminal
P20.14
enabled status setting 1
Digital input terminal
P20.15
enabled status setting 2
Digital input terminal
P20.16
enabled status setting 3
Terminal UP/DOWN
frequency adjustment
P20.17
control
Scope
66: Start wobble frequency
67: Clear wobble frequency status
68: Running prohibited
69: DC injection braking at running
70~99: Reserved
0.000s~1.000s
0.0s~3600.0s
0.0s~3600.0s
Unit's place: X1
0: Positive logic
1: Negative logic
Decade: X2 (same as unit's place)
Hundreds place: X3 (same as
unit's place)
Thousands place: X4 (same as
unit's place)
Unit's place: X5
0: Positive logic
1: Negative logic
Decade: X6 (valid as ordinary
terminal, same as unit's place)
Hundreds place: reserved)
Thousands place: reserved
Unit's place: AI1
0: Positive logic
1: Negative logic
Decade: AI2 (same as unit's place)
Hundreds place: Reserved
Thousands place: reserved
Unit's place: action when stop
0: Clear
1: Holding
Decade: action on power loss
0: Clear
1: Holding
Hundreds place: integral function
0: No integral function
1: Integral function enabled
- 35 -
Chapter 4 List of Parameters
Factory
Attr
Default
0.010s
0.0s
0.0s
0000
0000
0000
0000
○
○
○
●
●
●
○