Best E5 Series User Manual page 140

Chapter 5 Specification of Parameters
Digital setting of brake
P32.15
When 0 is selected for P32.13, this parameter value limits the maximum output brake torque.
100% corresponds to rated torque of the motor.
Torque limit coefficient in
P32.16
flux weakening
Under the pattern of SVC speed control, and when the drive is running at frequency higher than
rated frequency (flux weakening zone), appropriate torque limit coefficient can effectively
improve the performance of output torque and Accel/Decel characteristics.
Driven slip compensation
P32.17
Under SVC pattern, adjustment of this parameter value can improve the speed accuracy when
driving electric-driven load. If the load is becoming heavier and the motor speed is relatively
lower, set a bigger value, while the motor speed is relatively higher, set a smaller value.
Brake slip compensation
P32.18
Under SVC pattern, adjustment of this parameter value can improve the speed accuracy when
driving power generating load. If the load is becoming heavier and the motor speed is relatively
higher, set a bigger value, while the motor speed is relatively lower, set a smaller value.
Group P33 Parameters of Motor 2
When motor 2 is selected as current loaded motor, please set motor parameters in Group P33.
The specification of Group P33 of motor 2 is the same with that of Group P30 of motor 1.
P33.00 Type of motor 2
P33.01 Power rating of motor 2
P33.02 Rated voltage of motor 2
P33.03 Rated current of motor 2
P33.04 Rated frequency of motor 2
P33.05 Pole pairs of motor 2
P33.06 Rated speed of motor 2
torque
gain
gain
Range: 0.0%~200.0%
Range: 0.0%~100.0%
Range: 10.0%~300.0%
Range: 10.0%~300.0%
Range: 0~2
Range:
0.4kW~6553.5kW
Range: 0V~480V
Range: 0.0A~6553.5A
Range:
0.00Hz~600.00Hz
Range: 0~80
Range: 0~65535 r/min
- 136 -
E5 User Manual
Factory default:
180.0%
Factory default:
50.0%
Factory default:
100.0%
Factory default:
100.0%
Factory default: 0
Factory default:
model defined
Factory default: 380V
Factory default:
model defined
Factory default:
50.00Hz
Factory default: 4
Factory default:
model defined