E5 User Manual
Chapter 3 Keypad Operation
This chapter provides guidance for basic "running operation", please read it carefully in detail
before using the inverter.
3.1 Operation of Keypad
Operation Keypad is the connector for communication between human and equipment, which
is composed of key part and display part. User inputs control commands through keys, and
display part shows parameter information and different running conditions. Keypad
appearances are as below:
3.2 Operation Keypad Explanation
Symbol
Key Name
Inverter starts running once this key is pressed.
Run key
This key is invalid when inverter is in external
control mode.
Inverter stops running when this key is pressed;
Stop/Reset Key
Reset inverter by this key under fault alarm.
Multifunction key
Refer to parameter P70.00.
Function
- 23 -
Chapter 3 Keypad Operation