Best E5 Series User Manual page 139

E5 User Manual
usually needs to restrict the output torque of the motor. This parameter sets the limitation
command source.
0: P32.14 digital setting
Restrict output torque through digital set parameter P32.14. 100% corresponds to motor
rated torque.
1: Analog input AI1
2: Analog input AI2
3: Reserved
Limit the torque through analog input. The limited range is "0~200%r x rated torque".
4: X6/DI pulse input
Restrict the torque through X6/DI pulse input. The limited range is "0~200%r x rated torque".
5: Communication
A superior device sets the limitation value of the output torque through standard RS485
communication interface at the drive. Refer to parameter Group P60 and appendix for details
of communication.
Brake torque limited
P32.13
Under the pattern of SVC speed control, and when the motor is driving a power generating load,
it needs to restrict the output brake torque of the motor. This parameter sets the limitation
command source.
0: P32.15 digital setting
Restrict output brake torque through digital set parameter P32.15. 100% corresponds to
rated torque of the motor.
1: Analog input AI1
2: Analog input AI2
3: Reserved
Limit the torque through analog input. The limited range is "0~200%r x rated torque".
4: X6/DI pulse input
Restrict the torque through X6/DI pulse input. The limited range is "0~200%r x rated torque".
5: Communication
A superior device sets the limitation value of the output torque through standard RS485
communication interface at the drive. Refer to parameter Group P60 and appendix for details
of communication.
Digital setting of
P32.14
electric-driven torque
When 0 is selected for P32.12, this parameter value limits the maximum output electric-driven
torque. 100% corresponds to rated torque of the motor.
source
Chapter 5 Specification of Parameters
Range: 0~5
Range: 0.0%~200.0%
- 135 -
Factory default: 0
Factory default:
180.0%