BRAKES (CAB)
*TRACTION CONTROL SWITCH —
TEST
10
Turn ignition off.
Disconnect the Traction Connector Switch Connector.
Note: Check connector - Clean/repair as necessary.
Measure across the Traction Control Switch Sense circuit and Ground circuit, on
Switch.
Depress the Traction Control Switch.
Using an ohmmeter, take measure while depressing the Traction Control Switch.
Is the resistance below 2.0 ohms across switch when the switch is depressed?
Yes → Go To 11
→ Replace the Traction Control Switch.
No
11
If there are no potential causes remaining, replace the CAB.
View repair options.
Repair
ACTION
Replace the CAB.
Continued
60
APPLICABILITY
All
All