SYSTEM OVERVOLTAGE —
TEST
4
Turn the ignition off.
Visually inspect the related wiring harness. Look for any chafed, pierced, pinched, or
partially broken wires.
Visually inspect the related wire harness connectors. Look for broken, bent, pushed
out, or corroded terminals.
Refer to any Hotline letters or Technical Service Bulletins that may apply.
Were any problems found?
Yes → Repair as necessary.
→ Test Complete.
No
Continued
ACTION
Perform ABS VERIFICATION TEST.
55
BRAKES (CAB)
APPLICABILITY
All