PT
WHEEL ALIGNMENT
SPECIFICATIONS
WHEEL ALIGNMENT
NOTE: All specifications are given in degrees.
FRONT WHEEL ALIGNMENT
CAMBER
Cross Camber (Maximum Side-To-
Side Difference)
CASTER
Cross Caster (Maximum Side-To-Side
Difference)
TOTAL TOE*
REAR WHEEL ALIGNMENT
CAMBER
TOTAL TOE*
THRUST ANGLE
Note:
* TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE must be equally split between
each front wheel to ensure the steering wheel is centered after setting toe. Positive toe (+) is toe-in and negative
toe ( ) is Toe-out.
2001 PT CRUISER
SUSPENSION
NOTE: All wheel alignments are to be set with the
vehicle at curb height. Refer to CURB HEIGHT MEA-
SUREMENT in SERVICE PROCEDURES.
PREFERRED SETTING
0.00°
0.00°
+2.45°
0.00°
+0.10°
PREFERRED SETTING
0.00°
+0.20°
0.00°
SUSPENSION
2 - 1
ACCEPTABLE RANGE
-0.40° to +0.40°
0.50
+1.45° to +3.45°
1.00°
0.00° to +0.20°
ACCEPTABLE RANGE
-0.25° to +0.25°
+0.00° to +0.40°
-0.30° to +0.30°