Suzuki WagonR+ RB310 Service Manual page 924

Manual Transaxle Symptom Diagnosis
Condition
Gears slipping out of
mesh
Hard shifting
Noise
Diagnosis
Possible Cause
Maladjusted gear shift/select control cables
Worn shift fork shaft
Worn shift fork or synchronizer sleeve
Weak or damaged locating springs
Worn bearings on input shaft or counter shaft
Worn chamfered tooth on sleeve and gear
Maladjusted gear shift/select control cables
Inadequate or insufficient lubricant
Improper clutch pedal free travel
Distorted or broken clutch disc
Damaged clutch pressure plate
Worn synchronizer ring
Worn chamfered tooth on sleeve or gear
Worn gear shift/select control cables joint
Distorted shift shaft
Inadequate or insufficient lubricant
Damaged or worn bearing(s)
Damaged or worn gear(s)
Damaged or worn synchronizer parts
Maladjusted backlash between bevel pinion and gear Adjust as prescribed
Improper tooth contact in the mesh between bevel
pinion and gear
MANUAL TRANSAXLE (M13 ENGINE MODEL) 7A2-5
Correction
Adjust.
Replace.
Replace.
Replace.
Replace.
Replace sleeve and gear.
Adjust.
Replenish.
Adjust.
Replace.
Replace clutch cover.
Replace.
Replace sleeve or gear.
Replace.
Replace.
Replenish.
Replace.
Replace.
Replace.
Adjust or replace