Suzuki WagonR+ RB310 Service Manual page 1154

AUTOMATIC TRANSAXLE (M13 ENGINE MODEL) 7B1-189
36) After applying A/T fluid to rear sun gear thrust bearing race
(1), install it to rear planetary sun gear (2).
37) After applying A/T fluid to rear sun gear thrust bearing (1),
install it to forward clutch hub (2).
38) After applying A/T fluid to forward clutch hub (1), install it in
transaxle case (2).
39) After applying A/T fluid to intermediate shaft thrust bearing
rear race (3), thrust bearing (2) and front race (1), install
them to forward and reverse clutch assembly (4).
Bearing race dimension
Outside diameter 30.6 mm (1.20 in.)
Thickness
40) Apply A/T fluid to forward and reverse clutch assembly (1).
Install forward and reverse clutch assembly while rotating
clockwise and counter clockwise frequently to fit clutch discs
to mating hubs.
NOTE:
Before installation, align teeth of forward and reverse
clutch discs to facilitate installation.
Front race
28.2 mm (1.11 in.)
2.0 mm (0.08 in.) 2.0 mm (0.08 in.)
Rear race