Suzuki WagonR+ RB310 Service Manual page 460

WARNING:
Do not removal all of the wheel bolts at once, because all the wheels of this vehicle are mounted by
the wheel bolts.
Leave a bolt at least not to drop the wheel.
Support the wheel and/or tire and then remove the bolt(s) left with the wheel.
NOTE:
• All front suspension fasteners are an important attaching part in that it could affect the perfor-
mance of vital parts and systems, and/or could result in major repair expense. They must be
replaced with one of the same part number or with an equivalent part if replacement becomes nec-
essary. Do not use a replacement part of lesser quality or substitute design. Torque values must be
used as specified during reassembly to assure proper retention of this part.
• Never attempt to heat, quench or straighten any front suspension part. Replace it with a new part or
damage to the part may result.
• For descriptions (items) not found in this section, refer to the same section of the Service Manual
mentioned in FOREWORD of this manual.
General Description........................................3D-2
Diagnosis.........................................................3D-3
Wheel Disc, Bolt & Bearing Check................3D-3
On-Vehicle Service..........................................3D-4
Stabilizer Bar and/or Bushings......................3D-4
Strut Assembly ..............................................3D-5
SECTION 3D
FRONT SUSPENSION
CONTENTS
Steering Knuckle / Bearing ...........................3D-6
Suspension Control Arm / Bushing .............3D-12
Tightening Torque Specifications...............3D-14
Required Service Material ............................3D-15
Special Tool...................................................3D-15
FRONT SUSPENSION 3D-1
3D