Suzuki WagonR+ RB310 Service Manual page 1330

INSTALLATION
To install front door lock, reverse removal procedure, noting the
following.
• Door latch striker.
Move door latch striker (2) up or down so its center aligns
with the center of groove "A" on the door lock assembly (1),
as shown.
NOTE:
Striker should be moved vertically and placed level. Do
not adjust door lock.
Tightening torque
(a) : 10 N·m (1.0 kg-m, 7.2 lb-ft)
(b) : 6 N·m (0.6 kg-m, 4.3 lb-ft)
3. Shaft
• Move door latch striker (1) sideways to adjust door outer
panel surface (2) flush with rear door outer panel or body
outer panel surface (3), as shown.
In order to correctly obtain door lock operates, increase or
decrease number of shims inserted between body and
striker (1) to adjust it.
NOTE:
Apply grease to striker contact parts periodically.
INSPECTION
Check that door open and closes smoothly and properly.
Also check that door latch half look operates properly (check that
door latch half lock keeps door from opening all the way) and door
latch full locks securely when closed.
Adjust door latch striker position if necessary.
BODY SERVICE 9-5