Suzuki WagonR+ RB310 Service Manual page 1102

AUTOMATIC TRANSAXLE (M13 ENGINE MODEL) 7B1-137
64) Turn over transaxle and uncaulk reduction drive gear nut (1).
65) Secure reduction drive gear (1) with parking lock pawl, then
remove reduction drive gear nut.
CAUTION:
• It is recommended that this operation should be car-
ried out on rubber mat to prevent damaging transaxle
case.
• Never reuse removed nut.
66) Using special tools and hydraulic press, remove planetary
ring gear subassembly (1).
Special tool
(A): 09913-84510
(B): 09923-78210
CAUTION:
Do not reuse planetary ring gear subassembly. Otherwise
it may cause damage to planetary gear unit and/or reduc-
tion gears.
67) Remove parking lock pawl shaft, then spring (2) and parking
lock pawl (1).